420 HE horizontal bending and straightening machine

The Stierli-Bieger 420 HE is a very powerful and compact horizontal press. The solid steel compound machine plate has a very strong tool holder with a  diameter of 80 mm. An extremely wide range of tasks can be carried out with the 200 mm high tools.

The central bending pin holder is reinforced by a hardened steel bushing. Three further holes are for the plug-in pins of the pipe bending or straightening tools. The very large working plate ensures effective positioning of very large bent parts.

The special oil-lubricated guided cylinder requires no maintenance! The working pressure of 420 kN is delivered with the full stroke length of 300 mm and at full operating speed. The stroke limitation operates electro-hydraulically with the tried and tested Stierli switch-off system with Vernier scale and 0 mark. It is operated with the foot switch or the special manual control cable, with which jogging mode, automatic mode and the straightening function can be actuated.

The machine can be transported easily inside the factory with a crane or pallet truck. Two tool trays provide organised storage of the tools so that they are always to hand. Please also note the wide range of tools!

Related products
820 CNC

820 CNC horizontal bending machine for bending and straightening

Working power 82 to / 820 kN
Tooling height 300 mm / 11.81" (inch)
Bending capacity flat 300 / 20 (30) mm
Straightening capacity HEA 260
Pipe bending 3/8" - 3"
Round bar ø 60 mm
Control CNC Control
1300 CNC

1300 CNC horizontal bending machine for bending and straightening

Working power 130 to / 1300 kN
Tooling height 300 mm / 11.81" (inch)
Bending capacity flat 300 / 30 (40) mm
Straightening capacity HEB 300
Pipe bending 3/8" - 3"
Control CNC Control
220 HE

220 HE horizontal bending and straightening machine

Working power 22 to / 220 kN
Tooling height 130 mm / 5.11" (inch)
Bending capacity flat 130 / 16 mm
Straightening capacity HEB 100
Pipe bending 3/8" - 1 ½"
Round bar ø 30-35 mm
Control NC control
220 CNC

220 CNC horizontal bending machine for bending and straightening

Working power 22 to / 220 kN
Tooling height 130 mm / 4.72" (inch)
Bending capacity flat 130 x 16 mm
Straightening capacity HEB 100
Pipe bending 3/8" - 1 ½"
Round bar ø 35 mm
Control CNC Control
420 CNC bending press

420 CNC bending machine for bending and straightening

Working power 42 to / 420 kN
Tooling height 200 mm / 7.87" (inch)
Bending capacity flat 200 / 20 mm
Straightening capacity HEA 180
Pipe bending 3/8" - 1 ½"
Round bar ø 35 mm
Control CNC Control
toggle machines Maschinentypen